Yamaha 200hp Four Stroke Outboard Motor sale-V6 3.3L F200XA

$17,900.00  $10,500.00
Save: 41% off

Add to Cart:


2024 Yamaha 200hp Four

Stroke Outboard Motor sale-

V6 3.3L  F200XA 

Type:

Yamaha Outboard Engines

Model:
200 HP Four Stroke V6 3.3L
Model Number: F200XA
Series: Four Stroke V6 3.3L 
HP: 200
Engine Type:
60° V6 DOHC 24-Valve 
Displacement:
204.6 ci (3352 cc) 
Bore x Stroke:
94 x 80.5mm (3.70 x 3.17 in) 
Prop Shaft Horsepower:
200hp at 5500 rpm (VF200LA) 
Compression Ratio: 9.9
Fuel/Induction System:
EFI/VCT/DOHC 
Exhaust:
Through Propeller 
Intake:
Single Throttle Valve 
Ignition System:
TCI Micro Computer 
Spark Plug:
LFR6A-11-00-000 
Alternator Output:
44 Amp (Battery charge
Starting System:
T = Electric w/ PTT 
Lubrication: Wet Sump 
Engine Oil Capacity:
4.7L/4.5L w/without filter 
Full Throttle RPM Range:
5000 - 6000 
Cooling:
Water/Thermostatic Control 
Recommended Engine Oil:
Yamalube® 4M
(See owner's manual) 
Recommended Fuel:
Regular Unleaded
(Minimum Pump Octane 87) 
Recommended Fuel Filtration:
Yamaha 10-Micron
Fuel/Water Separating
Filter (external) 
Ethanol Blend Limit:
10% Maximum 
Gear Ratio: (30
Gear Shift:
Forward, Neutral, Reverse 
Shaft Length: 25" 
Degree of Tilt: TBD 
Degree of Trim:
-3° through +16° 
C.A.R.B. Rating: 3-Star 
Dry Weight: 608 lb 
Rotation: Standard (Right) 
Mounting Centers: 28.6" 
Steering Angle (maximum):
32° from center, either direction 
Warranty:
3-Year Pleasure, 3-Year
Government, 1-Year Commercial 
Command Link® System:
Optional 
Power Trim & Tilt: Standard 
Freshwater Flush:
Standard S S S 
Counter Rotation:
"LF" Model - Available
on F200, F250 
Yamaha Diagnostic System:
Compatible 
Multi-Charge Monitoring System:
Standard 
Single Belt Drive System:
Standard 

  • Model: 118
  • Shipping Weight: 608lbs
  • 47 Units in Stock


Current Reviews: 1

1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'yamaha_motor.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p where opa.products_id = '302' and opa.orders_id = opb.orders_id and opb.products_id != '302' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = 1 group by p.products_id order by o.date_purchased desc limit 6]