Type: Outboard Motor
Year: 2024
Model: 250 HP Four
Stroke V6 4.2L Offshore
Model Number:
LF250UCA
Series: Offshore 4.2L
HP: 250
Engine Type: V6 (60°)
Displacement:
4.2L (254 ci)
Bore x Stroke:
96 x 96mm (3.78 x 3.78 in)
Prop Shaft Horsepower:
250hp at 5500 rpm
(F/LF250)
Compression Ratio:
10.3
Fuel/Induction System:
DOHC Fuel Injection VCT
Exhaust:Through Propeller
Intake:Single Throttle Valve
Ignition System:
TCI Micro Computer
Spark Plug:
LFR6A-11-00-000
Alternator Output: 70 Amp
Starting System: Electric
Lubrication: Wet Sump
Engine Oil Capacity:
6.3L/6.0L w/with filter
Full Throttle RPM Range:
5000-6000
Cooling:
Water/Thermostatic Control
Recommended Engine Oil:
Yamalube® 4M
(See owner's manual)
Recommended Fuel:
Regular Unleaded
(Minimum Pump Octane 89)
Recommended Fuel Filtration:
Yamaha 10-Micron Fuel/Water
Separating Filter (external)
Ethanol Blend Limit:
10% Maximum
Gear Ratio: (21
Gear Shift:
Forward, Neutral, Reverse
Shaft Length: 30"
Degree of Tilt: 67°
Degree of Trim:
-3° through +16°
C.A.R.B. Rating: 3-Star
Dry Weight: 571 lbs
Mounting Centers: 28.6"
Steering Angle (maximum):
32° from center, either direction
Rotation: Counter (Left)
1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'yamaha_motor.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image
from orders_products opa, orders_products opb, orders o, products p
where opa.products_id = '445'
and opa.orders_id = opb.orders_id
and opb.products_id != '445'
and opb.products_id = p.products_id
and opb.orders_id = o.orders_id
and p.products_status = 1
group by p.products_id
order by o.date_purchased desc
limit 6]
