Type: Outboard Motor
Model: 200 HP Four Stroke In-line Four
Model Number: F200LB
Series: In-Line Four
HP: 200
Engine Type: IN-LINE 4 CYLINDER
Displacement: 2785cc (170.0 ci)
Bore x Stroke: 96 x 96.2mm (3.78 x 3.79in)
Prop Shaft Horsepower: 200 @ 5500 RPM
Compression Ratio: 10.3
RPM Range: 5000-6000
Fuel Induction System: EFI Double Overhead Cam
Fuel Type: Unleaded gasoline (minimum pump octane 89)
Exhaust: Thru prop
Ignition System: TCI Micro Computer
Intake: Single Electronically Controlled Throttle Valve
CARB Rating: 3-Star
Spark Plug: LFR6A-11-00-000
Alternator Output: 50A
Starting System: Electric with Power Trim & Tilt
Lubrication: Wet Sump
Oil Capacity: 4.5L/4.3L w/without filter
Recommended Engine Oil: Yamalube 4M
Recommended Fuel Filtration:
Yamaha 10 Micron Fuel/Water Separating Filter (external)
Ethanol Blend Limit: 10% Maximum
Gear Ratio: (26-14) 1.86-1
Degree of Tilt: 70�
Degree of Trim: -4� through +16�
Cooling: Thermostatic Control
Dry Weight: 487 lbs
Gear Shift: F-N-R
Power Trim and Tilt: Standard
Shaft Length: 20 inch
Gearcase Rotation: Right Hand (Standard)
Freshwater Flush: Y
1055 Expression #1 of ORDER BY clause is not in GROUP BY clause and contains nonaggregated column 'yamaha_motor.o.date_purchased' which is not functionally dependent on columns in GROUP BY clause; this is incompatible with sql_mode=only_full_group_by
in:
[select p.products_id, p.products_image
from orders_products opa, orders_products opb, orders o, products p
where opa.products_id = '559'
and opa.orders_id = opb.orders_id
and opb.products_id != '559'
and opb.products_id = p.products_id
and opb.orders_id = o.orders_id
and p.products_status = 1
group by p.products_id
order by o.date_purchased desc
limit 6]
